FREE DELIVERY TODAY - Place your first order now!
Soon stocks will run out
Dont miss this opportunity while supplies last.
AER Basic Performer Acoustic Guitar Combo Amp Black
In Stock
Description
The Basic Performer Acoustic Guitar Amp with its specially designed construction and its 4 x 60 watt power is an ideal tool for acoustic and electric bass-amplification. More than that, it suits very well for all instruments with strength in the low register, e.g.: cello, harp etc. Apart from its two channels with three-band tone- control and mute-switch it offers a compressor and a notch filter.Long scale lengths, huge body sizes, and resonance problems are only some trouble zones of the acoustic instrument. The small twin-cone system is perfect – it is fast, provides a superior coverage for the critical mid-range and has got enough substance in the bass range. The AER Basic Performer has four 8″-twin-cone speakers which are individually powered by four 60W power amps provide for the required surface area and the necessary sound pressure level.The special AER band-pass / bass-reflex cabinet design supports the reproduction of even the lowest frequencies with definition. Hi-end preamps, proper filters and additional professional sound design make the Basic Performer amplifier a multitalented all-round solution.The sound characteristics of this AER amp are full range, open and light – breathing as well as grumbling and surprisingly appropriate for far more instruments than the bass-related instruments such as harp, cello, accordion ? or even try a jazz guitar.
AER Basic Performer Acoustic Guitar Combo Amp Black Specs
| Inputs | Ch 1: |
| Line | unbalanced, 1 MEG |
| Mic | balanced, 600 Ohm |
| Ch 2 | |
| Line | unbalanced, 1 MEG |
| Mic | balanced, 600 Ohm |
| Eff.Return | -10dBV/10k |
| Tape-In | -10dBV/10k |
| Outputs | Tuner: -10dBV |
| Line | 0dBV |
| DI | -20dBV |
| Send | -10dBV |
| Phones | stereo, 300 mV / 32 Oh |
| Footswitch Effect External effect = Tip, ground = Sleeve | |
| Footswitch Mute | Ch 1 = Tip, Ch 2 = Ring |
| Footswitch Master | Solo = Tip, Ensemble = Ring |
| EQ | Channel 1: |
| Bass | ?18 dB/ 100 Hz |
| Middle | ?13 dB/ 550 Hz |
| Treble | ?11 dB/ 10 kHz |
| Channel 2 | |
| Bass | ?10 dB/ 80 Hz |
| Middle | ?10 dB/ 200 Hz - 1kHz |
| Treble | ?10 dB/ 10 kHz |
| Colour | - 3 dBV/ 700 Hz and + 10 dBV/ 10kHz |
| Analog Signal | |
| Processor | Limiter, Subsonic Filter und |
| Enhancer | |
| Power Amp | Powerconsumption: 220-240 V / 50-60Hz / 300 VA (110V / 50-60Hz) |
| Rating | 200 Watt / 4 ohm rms |
| Mains Fuse | 3.1 A slow |
| Speaker | 4 x 8' twin-cone speaker system (98 dB 1w/1m, freq. range |
| 60 Hz - 18 kHz) | |
| Cabinet | 0.59' 3(15 mm) birch plywood |
| Dimension | 20.87' (530 mm) high, 14.17' (360 mm) wide, 15.75' (400 mm) deep |
| Finish | waterbased acrylic, black spatter finish |
| Weight | 50.72 (23 kg) |
| 0dB/V 1V | |
| Specifications and appearance subject to change without notice |
Additional information
| App Type | Bass Amplifiers |
|---|
Reviews
There are no reviews yet.