FREE DELIVERY WORLDWIDE TODAY
End of the sale:
00
days
00
hours
00
minutes
00
sec.
Hot Deals
Soon stocks will run out
Dont miss this opportunity while supplies last.
DYNACORD L1300FD DSP Power Amplifier
$581.00
In Stock
Description
With 2 channels of 650W peak power on tap and onboard DSP, the Dynacord L1300D offers plenty of juice to power your passive PA system with authority. Built-in FIR Drive technology and true 2 ohm stability mean your system will sound its best, every time. Thanks to this power amplifier’s rock-solid reliability, you will perform with peace of mind at every gig. The L1300FD’s intuitive system control software makes setup and control easy, so you spend more time focusing on the performance and less time worrying about your gear.
DYNACORD L1300FD DSP Power Amplifier Specs
| Maximum RMS Voltage Swing THD = 1%, 1 kHz | 55.3 V |
| Voltage Gain Ref.1 kHz | 32.0 dB |
| THD at 450 W/4 O MBW = 80 kHz, 1kHz | < 0.05% |
| IMD-SMPTE, 60 Hz, 7 kHz | < 0.1% |
| DIM30, 3.15 kHz, 15 kHz | < 0.05% |
| Maximum Input Level | +21 dBu |
| Crosstalk ref. 1 kHz, at 100W/4 O | < -80 dB |
| Frequency Response, ref. 1 kHz | 10 Hz to 21 kHz (?1 dB) |
| Input Impedance, Active Balanced | 20 k O |
| Signal to Noise Ratio Amplifier, A-weighted, ref to Max. Output Power@ 8 O | > 104 Db |
| Output Noise, A-weighted | < -68 dBu |
| Output Stage Topology | Class AB |
| Power Requirements | 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) |
| Power Consumption 1/8 Maximum Output Power @ 4 O | 550 W |
| Mains Fuse 240 V/230 V | T10AH; 120 V/100 V: T20AH |
| Protection | Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, In rush current limiters, Turn on delay |
| Cooling | Front-to-rear, 3-stage-fans |
| Ambient Temperature Limits | +5?C to +40?C (40?F to +105?F) |
Additional information
| Live Sound Type | Live Power Amplifiers |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.